【重要提醒】單極安全滑觸線主要特點是什么|探索供電系統的小秘密~~~
1、接觸性能好，無拉弧現象，不會發生電源中斷故障，運行可靠。
1. Good contact performance, no arc phenomenon, no power interruption, reliable operation.
2、可適用于高溫、高濕、高電壓、強腐蝕、多粉塵等惡劣環境中。
2. It can be used in high temperature, high humidity, high voltage, strong corrosion, multi-dust and other harsh environments.
3、機械強度高、剛度好、不易彎曲變型，能承受較大的短路沖擊電流，不致發生故障。
3. It has high mechanical strength, good stiffness, not easy to bend, and can withstand large short-circuit impulse current without breakdown.
4、采用電阻率較小的銅導體或銅鋁型材，可大幅度降低導線本身電能的損耗。
4. The use of copper conductors or copper-aluminium profiles with low resistivity can greatly reduce the loss of electric energy of the conductors themselves.
5、銅導體載流量大，zui大可達3000A以上。
5. The copper conductor has a large carrying capacity, and the Zui can reach more than 3000A.
6、附加輔助電纜后，導線的阻抗能成倍降低，可組成低阻抗滑導線，應用更為廣泛。
6. After adding auxiliary cables, the impedance energy of the conductor is reduced exponentially, and the low impedance sliding conductor can be formed, which is more widely used.
7、布線可多樣化，可在上部，下部或側面滑觸。
7. Wiring can be diversified, and can be slid on top, bottom or side.
8、QYT系列高溫剛體滑觸線散熱面積大，溫升低，使用壽命長。
8. QYT series high temperature rigid sliding contact wire has large heat dissipation area, low temperature rise and long service life.
9、結構簡單，安裝方便，可分為上壓式、側壓式、下壓式三種。
9. It is simple in structure and easy to install. It can be divided into three types: upper pressure type, side pressure type and lower pressure type.
10、維修更換方便、迅速，省時，省力。
10. Maintenance and replacement are convenient, rapid, time-saving and labor-saving.
更多滑觸線資料 盡在濟南德瑪電氣有限公司